Qualcomm Plasma Equipment RFID Tooling Error-Proofing System
Based on the RockPlus EAM (Enterprise Asset Management) platform, Hegong Software established an integrated Tooling error-proofing system for the Plasma equipment built on automatic RFID identification + fixture rule verification + control-box signal interlocking + audible/visual alarms + data traceability.
1. RockPlus EAM as the digital management base for Plasma Tooling
The project first established, in RockPlus EAM, the correspondence among products, production programs, Plasma equipment and Tooling fixtures.
The system maintains each fixture's identity, RFID tag number, applicable products and mounting positions, giving every physical Tooling a unique digital identity.
When an operator performs a changeover, the system automatically generates the Tooling list and position requirements for that changeover according to the selected product model and production program.
This creates a digital linkage of:
Product → Production program → Plasma equipment → Fixture position → Tooling identity → RFID EPC
which provides the reference basis for automatic identification and forced error-proofing.
2. Automatic RFID identification with dual "identity + position" verification
Each Plasma Tooling fixture carries a unique RFID tag; an RFID reader with multiple antennas is deployed inside the equipment.
The system automatically reads the EPC of every fixture currently installed through the RFID antennas and sends the readings in real time to RockPlus EAM, which compares them position by position against the standard Tooling list defined for the current product.
The system automatically determines whether the installed fixture is correct, applicable to the current product, and mounted at its specified position.
Verification results are maintained as Pending / Passed / Failed states. The moment a wrong fixture, a fixture belonging to another product, or an unknown RFID tag is read, the system immediately judges an exception and raises an alarm — no more item-by-item visual checking by operators.
3. High-temperature, anti-metal RFID tags break through the Plasma environment challenge
For the ~80 °C internal environment and the metallic nature of the Tooling fixtures, the project adopted high-temperature-resistant, anti-metal RFID tags suited to the actual conditions.
The high-temperature rating ensures the tags survive the Plasma equipment's internal heat; the anti-metal design reduces the impact of metal fixtures and mounting surfaces on RF performance.
Combined with the actual mounting positions of each Tooling inside the Plasma equipment, the RFID antennas were deployed in a targeted layout, using multi-antenna polling to automatically inventory and identify fixtures across multiple positions.
Through the combined design of tag selection, tag installation, antenna layout and software identification strategy, the project achieved stable RFID deployment inside a hot, metallic Plasma equipment environment.
4. Control-box integration into Plasma start/stop — equipment-level forced error-proofing
This is the core that distinguishes the project from ordinary RFID asset-identification projects.
Hegong Software modified and upgraded the Plasma equipment: an industrial control box was connected to the equipment's start/stop control signal, translating RockPlus EAM's RFID verification result directly into a condition governing whether the Plasma equipment may start.
Once a changeover begins, the system first locks the Plasma equipment's start signal; the RFID system then reads the Tooling at each position and verifies them one by one:
Tooling not detected → Plasma equipment stays locked
Tooling model mismatch → Plasma equipment stays locked and an alarm is raised
Tooling installed in the wrong position → Plasma equipment stays locked and an alarm is raised
All Tooling verified → equipment lock released automatically → Plasma equipment may start
In other words, the mechanism no longer stops at a "pop-up reminder".
Even if an operator installs the wrong fixture, as long as the RFID verification has not fully passed, the Plasma equipment simply cannot be started — wrong states are blocked from production at the equipment control logic level, achieving genuine forced error-proofing (Poka-Yoke).
5. Audible/visual alarms plus role permissions close the exception-handling loop
The project also linked equipment control with on-site audible/visual alarms.
While any Tooling is in the Pending state, the Plasma equipment stays locked; when a fixture error is found, the system triggers the exception alarm and indicates the specific failing position on the operator terminal, helping the operator localize the problem quickly.
When all fixtures pass verification, the system releases the Plasma equipment start lock and returns to the normal state.
Role permissions further constrain the exception process: an ordinary Operator performs routine changeovers only; unlocking under exceptional conditions requires Engineer privileges, preventing operators from casually bypassing the error-proofing mechanism.
6. Full changeover records provide complete Tooling traceability
RockPlus EAM automatically records the whole Plasma changeover process, including product model, production program, equipment, Tooling identity, RFID tag, mounting position, verification result, read time, operator and exception-alarm details.
When a later production or quality exception occurs, historical usage can be queried quickly by product, equipment, time and fixture.
The final closed digital loop:
Fixture identity identifiable → installation verifiable → errors interceptable → Plasma start interlocked → changeover recordable → exceptions traceable









